- The Perfect Rolled Curb Solution
- Reduces Impact By Upto 80%
- Bolts Together, Not To The Ground
- Made From Recycled Tires
- Made In The USA
The Bridjit expandable 3-piece rubber curb ramp protects the undercarriage of vehicles from damage when driving over rolled curb driveway entries. Rubber from recycled tires makes this curb ramp resistant to weather and street sweepers, and allows parallel-parking. The 3-piece 12-foot set includes a left-side, center, and right-side section for installation on both curved and straight driveway entries.
Bridjit Curb Ramps are placed in the gutter of a rolled curb driveway entry to create a gradual slope between the top of the curb and street. Bridjit Curb Ramps are designed to reduce the impact of a rolled curb entry by as much as 80% and can be used for protect the undercarriage of all types of vehicles, such as cars, trucks, golf carts, motorcycles, boat trailers and can be used to facilitate the movement of wheeled carts and hand trucks.
The 2-3/8" height at the center tapers to 3/4-inch at the top and bottom of the ramp. A 2-1/2-inch wide channel on the underside of each section allows water to flow under the ramp, accommodating storm runoff and tapered ends help prevent the buildup of debris.
Galvanized bolts measure 1/2 x 7-1/2-inch and are pre-inserted into the center section to connect the three sections, and are installed using only a hammer and screwdriver. Bridjit ramps are bolted together, not to the concrete.
Note:Additional 4ft wide center sections can be purchased to increase coverage beyond 12 feet. Check P/N 365393